The System is Arbor’s principal design platform. We developed The System to improve true rocker and camber designs by maintaining the integrity of both platforms without fusing either into a hybrid design. We believe that hybridization sacrifices some of the inherent benefits of each design philosophy. The System is an advanced rocker and camber design that improves upon the benefits of each platform depending on the needs of each rider. Whether you prefer the crisp, fully engaged performance of camber or the surfy, butter feel of rocker, The System creates a clean, effective connection to the snow, delivering a smooth ride with enhanced control.
The Rocker System design provides a surfy ride with natural float and cleaner tracking.
The Camber System design offers a poppy ride with crisp, fully engaged performance.
Grip Tech is a tri–radial sidecut design that is not “blended.” Natural shaping intersections, that in the past were eliminated, have been transformed into heel and toe contact points that provide a direct, more ergonomic way to grip the snow when additional control is needed. The extra contacts also form pivot zones that make turning easier and more natural. Grip Tech effectively moves a board’s primary interface with the snow underfoot, allowing us to deliver designs that don’t lose performance as we lift leading sections of the effective edge from the snow for a less grabby ride. Those designs include rocker, or camber with our new Uprise Fenders. Uprise Fenders pull the outside contact zones off the snow with angled 3º risers on all Camber System designs.
The System utilizes rocker or camber profiles created using the parabolic arc, which progressively reduces the amount of rocker or camber toward the tip and tail of a snowboard. This creates low, more effective profiles. On our Rocker System designs, parabolic profiling ensures the outside contact points are close enough to the snow to engage when maximum performance is required – higher speeds, fully loaded turns, and bigger landings. On Camber System designs, this guarantees the outside contact points do not dig too far into the snow, creating a cleaner, less catchy performance that makes it easier to turn, spin, and ride fast.
Pow Tech and Pow Fenders are a powder-specific version of the System Technology, offered on the Cask and Terrapin models. With PowTech, we’ve eliminated the front two GripTech contact points and moved the board’s primary interface with the snow under your back foot, allowing us to deliver powder specific performance driven by the power of your back leg. Pow Fenders are oversized Up-Rise Fenders that pull the outside contact points up off the snow, creating smooth turning and extra float.
Our signature Powerply topsheets are made with a sustainably sourced wood or bamboo topsheet. We refer to this technology as a Power Ply. The natural grain creates the style we’ve been known for since we launched in 1995. Less recognized is how the technology improves the strength, durability, and return of our snowboards. The Power Ply works like an added layer of fiberglass. During construction, the natural wood or bamboo fibers are turned into a composite layer inside the board, but the process takes time. We start with a log that must be soakedso that it can be sliced or “veneered” into sheets, which are then assembled into “faces”. The “faces” are then backed with a special fleece material, precision sanded, and pre– laminated to a protective foil made in part from natural castor bean oil. The finished topsheet is at last ready to be built into a snowboard. In the end, the process makes Arbor Power Ply designs the most labor–intensive snowboards on the market. The resulting performance, board life, finish quality, reduced reliance on man–made glues, coatings, and composites are worth the extra effort.
Hand Dyed Ash Properties: Origin:
Scientific Name: Fraxinus Americana
Sapwood white, cathedral grained, tough, flexible
Eastern North America
Carbonized Bamboo
Scientific Name:
Phyllostachys pubescens
Properties:
Fast growing, sustainable, fiberous, robust.
Origin:
South Asia
Maple
Scientific Name:
Acer saccharum
Properties:
Off-white to creamy, straight grained, fine textured.
Origin:
Northeastern North America
American Black Walnut
Scientific Name:
Juglans nigra
Properties:
Light gray-brown to chocolate, interlocked grain, course texture.
Origin:
Eastern United States
Inlaid Powerply
A specialized and highly intricate die cutting process allows us to combine the natural grain of multiple species of wood into singular, sophisticated Powerply topsheet.
SINTERED BASE
A higher molecular weight, sintered base that provides added durability and speed.
CROSSLINKED SINTERED SPEC BASE
Our new CrossLink base is a mid-density material that demonstrates increased speed and durability while maintaining the ease of repair.
EXTRUDED BASE
A tough, user–friendly extruded base that delivers lighter-weight performance.
BIAX GLASSING
A biax over biax lay–up that’s designed for park and street inspired all-mountain riding. Also creates a good platform for learning.
MIXED GLASSING
A triax over biax lay–up that’s best for versatility: pow, backcountry, groomers, jumps, and more.
AWD CARBON UPRIGHTS
Two carbon fiber uprights running from the tip and tail to just past the inserts. A set up that provides added landing durability and pop for bigger park and backcountry performance.
RWD CARBON A-FRAME
Diagonal carbon fiber inserts running diagonally from underneath your back foot to the outside contact point increase snap and rebound under your dominant back foot for powerful drive and power transfer.
AWD CARBON A-FRAME
A carbon fiber lay-up insert running from the contact points to the inserts creates structural a-frames for improved torsional performance in the steeps and at speed.
CROSS VECTOR NETTING
Our newly developed Carbon Vector Net reinforcements create evenly distributed torsional power and accelerated response from tip to tail.
FSC CERTIFIED SINGLE MALT CORE
Our standard wood core constructed with 100% sustainably grown poplar for highly reliable return and long-lasting durability.
FSC CERTIFIED HIGHLAND CORE
Our most versatile core, constructed with a 1:2 poplar to paulownia blend for super light weight performance, durability, and return.
FSC CERTIFIED HIGHLAND II CORE
A newly developed screening process has allowed us to hand select the very lightest and highest quality paulownia from our sourcing partners. The result is a lighter, more responsive version of our FSC Certified Highland Core known for highly reliable return and long-lasting durability.
FSC CERTIFIED DOUBLE BARREL CORE
Poplar to Paulownia blend with bamboo stringers running down the center of the board for added longitudinal pop and unmatched board control.
FSC CERTIFIED HIGHLAND SPLIT CORE
Our highly versatile FSC Certified Highland Core, with additional insert and centerline components for a premium factory splitboard.
FSC CERTIFIED HIGHLAND SPLIT CORE
Our highly versatile FSC Certified Highland Core, with additional insert and centerline components for a premium factory splitboard.
Starting with our 2020 line we are proud to announce that all Powerplys and R.A.P. Topless Tech veneers will be made with Entropy Bio-Resin, a replacement for traditional petroleum based resin that doesn’t affect performance or usability. The ingredients that go into Entropy Bio-Resin are sourced as co-products or waste products of other industrial processes and are manufactured employing green chemistry techniques that reduce the carbon footprint of the material by up to 40% (when compared to its petroleum based equivalent).
 | BIO-PLASTIC TOPSHEET:One of the materials we use in our quest to eliminate harmful pertrolium based plastics from our production cycle. Made from Castor Bean Oil, this eco-topsheet is extremely durable and water repellent. |
 | R.A.P. TOPLESS TECHNOLOGY: A build process in which we eliminate the need for our Bio-Plastic Topsheet, creating a lighter, more eco-friendly ride. |
 | Our highly durable, recycled steed edges embody two of our Arbor’s key values: quality and sustainability. |
 | When a plastic alternative is unavailable, as in the case of ABS sidewalls, we do our best to opt for a recycled material to improve the sustainability of our products |
 | A 360–degree, fully wrapped sidewall that eliminates the need for tip fill, while effectively tying the whole snowboard together. A technology that delivers incredibly tight tolerances for improved board life and durability |
 | Increased ramping on the nose and tail of the snowboard create the perfect platform for catch free nollies and fakie ollies. |
 | A shaping technique that narrows the profile of the snowboard towards the rear contact points. Tapered snowboards will have a wider nose and narrower tail, allowing the tail of the board to sink in deeper snow creating natural float and cleaner tracking. |
2x4 10 Pack Inserts
2x4 14 Pack Inserts
2x4 10 Pack Inserts
2x4 14 Pack Inserts
 | All Arbor snowboards hit the shop floor ready to ride with Wend Natural Wax. |
 | We detune the tip and tail contact points on all of our snowboards for a catch-free ride before they leave the factory. |
 | Karakoram’s new and improved splitboard clip is powerful, easier to use, and lighter. Once joined, the UltraClip fully constrains the seam of your splitboard to eliminate seam rattling, seam shearing, and seam rolling. The lever locks in the touring position as well to eliminate unwanted movement on the ascent. |
 | All of our die-cut bases feature our Zero Waste Base technology, and come in interchangable 2 colorways. This process is essential to reducing our carbon footprint and eliminating waste during the manufacturing process. |
 | We stand behind the quality and construction of every Arbor snowboard with an extended 3-Year Warranty. Find more information on our warranty policy. |